Amiga Video Expansion
From HwB
Available on Amiga 1000 computer.
Pinout
36+54 PIN EDGE CONNECTOR at the computer.
Pin | Name | Dir | Description |
---|---|---|---|
1 | RGB16 | Red Bit 0 | |
2 | RGB17 | Red Bit 1 | |
3 | LINELF | Audio Line Out Left | |
4 | LINERT | Audio Line Out Right | |
5 | C28D | Pixel-Synchronous Clock | |
6 | +5V | - | +5 Volts DC (1 A) |
7 | ARED | Analog Red | |
8 | +5V | - | +5 Volts DC (1 A) |
9 | GND | Digital Ground | |
10 | +12V | - | +12 Volts DC (40 mA) |
11 | AGREEN | Analog Green | |
12 | GND | Digital Ground | |
13 | GND | Digital Ground | |
14 | /CSYNC | Composite Sync | |
15 | ABLUE | Analog Blue | |
16 | /XCLKEN | Genlock Clock Enable | |
17 | GND | Digital Ground | |
18 | BURST | Burst Gate | |
19 | /C4 | 3.55/3.58 MHz Clock | |
20 | GND | Digital Ground | |
21 | GND | Digital Ground | |
22 | /HSYNC | Horizontal Sync (47 Ω) | |
23 | RGB4 | Blue Bit 4 | |
24 | GND | Digital Ground | |
25 | RGB7 | Blue Bit 7 | |
26 | /VSYNC | Vertical Sync (47 Ω) | |
27 | RGB15 | Green Bit 7 | |
28 | BLANK | Video Blank | |
29 | RGB23 | Red 7 | |
30 | /PIXELSW | Genlock Overlay (47 Ω) | |
31 | -5V | - | -5 Volts DC |
32 | GND | Digital Ground | |
33 | /XCLK | Genlock Clock | |
34 | /C1 | C1 Clock | |
35 | +5V | - | +5 Volts DC (1 A) |
36 | PSTROBE | Printer Port Handshake | |
1 | GND | Digital Ground | |
2 | RGB20 | Red Bit 4 | |
3 | RGB21 | Red Bit 5 | |
4 | RGB22 | Red Bit 6 | |
5 | GND | Digital Ground | |
6 | RGB12 | Green Bit 4 | |
7 | RGB13 | Green Bit 5 | |
8 | RGB14 | Green Bit 6 | |
9 | GND | Digital Ground | |
10 | RGB5 | Blue Bit 5 | |
11 | RGB6 | Blue Bit 6 | |
12 | GND | Ground | |
13 | SOG | Sync-On-Green Indicator | |
14 | TBASE | 50/60 Hz Software Clock Timebase | |
15 | CDAC | 7.09/7.16 MHz Clock | |
16 | PPOUT | Printer Port Paper Out | |
17 | /C3 | 3.55/3.58 MHz Clock | |
18 | PBUSY | Printer Port Busy | |
19 | /LPEN | Light Pen Input | |
20 | /PACK | Printer Port Acknowledge Handshake | |
21 | PSEL | Printer Port Select | |
22 | GND | Digital Ground | |
23 | PPD0 | Printer Port Data Bit 0 | |
24 | PPD1 | Printer Port Data Bit 1 | |
25 | PPD2 | Printer Port Data Bit 2 | |
26 | PPD3 | Printer Port Data Bit 3 | |
27 | PPD4 | Printer Port Data Bit 4 | |
28 | PPD5 | Printer Port Data Bit 5 | |
29 | PPD6 | Printer Port Data Bit 6 | |
30 | PPD7 | Printer Port Data Bit 7 | |
31 | /LED | LED (Audio filter bypass) Setting | |
32 | GND | Digital Ground | |
33 | RAWLF | Raw (Unfiltered) Audio Left | |
34 | AGND | Audio Ground | |
35 | RAWRT | Raw (Unfiltered) Audio Right | |
36 | AGND | Audio Ground | |
37 | n/c | - | Reserved for future expansion |
38 | n/c | - | Reserved for future expansion |
39 | GND | Digital Ground | |
40 | GND | Digital Ground | |
41 | n/c | - | Reserved for future expansion |
42 | n/c | - | Reserved for future expansion |
43 | GND | Digital Ground | |
44 | GND | Digital Ground | |
45 | RGB18 | Red Bit 2 | |
46 | RGB19 | Red Bit 3 | |
47 | RGB8 | Green Bit 0 | |
48 | RGB9 | Green Bit 1 | |
49 | RGB10 | Green Bit 2 | |
50 | RGB11 | Green Bit 3 | |
51 | RGB0 | Blue Bit 0 | |
52 | RGB1 | Blue Bit 1 | |
53 | RGB2 | Blue Bit 2 | |
54 | RGB3 | Blue Bit 3 |
Notes:
- Direction is Motherboard relative Card.
- Do not mix analog & digital grounds.
Contributions
Sources
- Amiga 4000 User's Guide from Commodore