SCSI Cable (D-Sub to Hi D-Sub)
From HwB
Pinout
25 PIN D-SUB MALE to the Amiga/Mac.
50 PIN HI-DENSITY D-SUB MALE to the peripheral.
| DSub | Hi DSub | |
|---|---|---|
| Request | 1 | 49 |
| Message | 2 | 46 |
| Input/Output | 3 | 50 |
| Reset | 4 | 45 |
| Acknowledge | 5 | 44 |
| Busy | 6 | 43 |
| Data Bus 0 | 8 | 26 |
| Data Bus 3 | 10 | 29 |
| Data Bus 5 | 11 | 31 |
| Data Bus 6 | 12 | 32 |
| Data Bus 7 | 13 | 33 |
| Control/Data | 15 | 48 |
| Attention | 17 | 41 |
| Select | 19 | 47 |
| Data Parity | 20 | 34 |
| Data Bus 1 | 21 | 27 |
| Data Bus 2 | 22 | 28 |
| Data Bus 4 | 23 | 30 |
| Termination Power | 25 | 38 |
Note: All the other pins (7+9+14+16+18+24) at the DSub should be connected to pins 1-25 at the Hi-density D-Sub connector.