ZX Spectrum Plus3 DiskB
From HwB
Available at ZX Spectrum +3.
Contents |
Pinout
2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 .-. .-. .-. .-. .-. .-. .-. .-. .-. .-. .-. .-. .-. .-. .-. .-. .-. |^^^^^^^^|^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^| |________|____________________________________________________________| `-' `-' `-' `-' `-' `-' `-' `-' `-' `-' `-' `-' `-' `-' `-' `-' `-' 1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 (viewed from rear)
Pin | Function |
---|---|
1 | Ready |
2 | GND |
3 | SIDE 1 SELECT |
4 | GND |
5 | READ DATA |
6 | D4 |
7 | WRITE PROTECT |
8 | GND |
9 | TRACK 0 |
10 | GND |
11 | WRITE GATE |
12 | GND |
13 | WRITE DATA |
14 | GND |
15 | STEP |
16 | GND |
17 | DIRECTIONSELECT |
18 | GND |
19 | MOTOR ON |
20 | GND |
21 | not used |
22 | GND |
23 | DRIVE SELECT 1 |
24 | GND |
25 | not used |
26 | GND |
27 | INDEX |
28 | GND |
29 | not used |
30 | GND |
31 | not used |
32 | GND |
33 | not used |
34 | GND |
Amstrad Compatibility
The AMSTRAD model FD-1 may be added to the +3 system as an additional disk drive. To connect the FD-1 to the +3, you will require the AMSOFT DL-2 disk interconnecting lead. Connect the end of the lead which is fitted with the larger edge-connector plug, into the socket marked DISK B: at the back of the +3. Connect the other end of the lead which is fitted with a smaller plug, into the socket at the back of the FD-1 disk drive.